What Is Industrial Plumbing?

Plumbing Company Shreveport is the piping that delivers water and transports wastewater. It also encompasses piping systems that carry steam and other gases for heating or cooling buildings.

In commercial buildings, pipes are often hidden from sight by walls or drywall, a practice known as chasing. But this doesn’t mean that they aren’t subject to wear and tear.


When considering plumbing, most people envision residential plumbers working on toilets, sinks, and showers. While the work residential plumbers do is important, there is a whole other realm of plumbing that happens in commercial properties, and that’s where industrial plumbing comes into play.

The piping systems in commercial buildings are much more complex than the ones in homes. The daily usage of everything from sinks to toilets is also much higher, so the pipes and fixtures must be able to handle that increased wear and tear. In addition, commercial buildings often have multiple floors, a ton of bathrooms, and countless appliances. This means that a lot of different things can go wrong with the plumbing in a short amount of time, so it’s imperative that it be top quality and built to last.

Industrial plumbing involves the installation and repair of water pipes, vents, and gas lines. It can also include constructing fixtures like showers and sinks using fittings. Fixtures do not refer to toilets since they are covered under a separate trade, but they can be made up of many parts that must be put together on site. The pipes that industrial plumbing deals with are typically made of metal, and they are used to transport a wide variety of substances.

These pipes can carry water, waste, steam, or gases, and they are usually made of steel, copper, or plastic. In some cases, the plumbing pipes in large factories and other facilities are made of concrete. Industrial plumbing also includes setting up systems that allow backflow prevention and certification. This is because many large businesses use municipal water supplies, so they must install backflow devices to prevent contamination. These are checked by a certified backflow tester on a regular basis to make sure they’re functioning correctly.

While the scope of work for industrial plumbers may be more expansive than their residential counterparts, the services they provide are still quite similar. They can still unclog drains, fix hot water heaters, and inspect commercial buildings’ plumbing systems to determine if any repairs or upgrades are necessary.

There are several differences between residential plumbing and commercial plumbing, the main one being the size and complexity of the plumbing system. While a home’s plumbing system is limited to toilets, sinks, and other fixtures that may need repair or replacement, industrial plumbers have the skills and tools needed for larger scale plumbing systems that may serve entire businesses or institutions.

With a larger volume of water usage, plumbing systems for businesses need to be more robust and able to handle more stress than residential ones. Industrial plumbers are able to repair and maintain plumbing in places like schools, hospitals, and office buildings, and know how to keep the pipes running smoothly so that employees can focus on their work.

A lot of the time, issues that might be a minor annoyance in a home are major headaches for a business. For example, if a drain starts to clog up in a restaurant, the food could start to spoil, and the whole place would need to close for the day while the issue is fixed. Industrial plumbers understand that a business needs to continue operating, so they’ll come in and fix any plumbing problems quickly and effectively.

Leaks and other issues in industrial plumbing are also a much bigger deal than they are in homes. In a hospital, for instance, the water system is used by hundreds of people every day, so it needs to be working properly at all times. Leaky taps or inefficient heaters can lead to huge waste of water and resources, as well as potential health violations, so the commercial plumbers will make sure everything is up to standard.

Likewise, things like sewer lines get used a lot and are at risk of damage or blockages. A simple clog can cause an entire building to shut down, so it’s important that a trusted industrial plumber is on call to fix these issues as soon as they happen. This is where an operations platform that uses the skills of your team to send out the right tech for each job can be a real lifesaver.

The plumbing systems in commercial properties are more complex than those found in homes. This is because they have to serve many more people at a time. As such, there is a greater likelihood of pipes becoming damaged or developing issues. This is why routine maintenance is so important. By catching problems before they become worse, you can protect the integrity of your commercial plumbing system and ensure that it continues to work well for years to come.

An experienced industrial plumber can help you with a wide range of maintenance tasks. From inspecting pipes to flushing drains, they can keep your plumbing systems running smoothly and effectively. They can also install water filtration systems to prevent mineral build-up that leads to clogs and slow draining. They can even repair corroded fixtures and replace worn parts to extend the life of your plumbing systems.

Another service offered by industrial plumbers is backflow prevention and certification. Large businesses that use a lot of water are required to install backflow devices to prevent contamination of the municipal water supply. These are installed by an industrial plumber and must be tested regularly to ensure they are functioning properly.

If you have a plumbing emergency in your business, it’s crucial to call a reliable industrial plumber right away. This will ensure that the problem is fixed quickly and efficiently so that your operations can continue without disruption. The best way to find a qualified plumber is to ask for recommendations from other local businesses or tradespeople you trust. Once you have a list, compare their qualifications and prices to make sure you’re getting the best value for your money.

Residential and industrial plumbing are very different from each other, so it’s important to hire a professional with the necessary skills and experience to meet your needs. A residential plumber can fix a leaky faucet or replace a toilet, but an industrial plumber must have the expertise to deal with larger scale commercial projects and equipment. The good news is that there are plenty of quality industrial plumbing services out there, so you can find the perfect company to meet your needs.

While the piping system is the core of industrial plumbing, it’s important to keep in mind the many other aspects involved. For instance, industrial pipes must be designed to accommodate and withstand high amounts of water pressure and flow velocity. These pipes also need to be durable enough to resist corrosion, as well as to handle a variety of fluids that may pass through them.

Because of the high usage, industrial pipes are typically thicker than those in homes and businesses. They must also be able to resist the effects of temperature and pressure. These factors are taken into account by the industrial plumber when laying out the pipe network for a facility.

Another crucial aspect of industrial plumbing is the coordination of different parts of a large building. For example, a stadium might have a lot of toilets and sinks to serve the hundreds of people in attendance during a game. The plumbing system must be designed so that these facilities can work together efficiently without causing a disruption to the event. The stadium’s plumbing team will consult with other departments, such as the food services and security teams, to ensure that all systems are working properly.

The design of industrial plumbing involves a great deal of math and engineering. For example, industrial plumbers must consider how much water is used each day and how it will be distributed throughout the facility. In addition, they must be able to assess the condition of existing pipes and determine whether they will be able to support the expected water usage. If not, they will need to install new pipes.

As such, industrial plumbers need to have a good understanding of math and engineering to perform their jobs effectively. They must also be able to work with different types of materials, including steel, aluminum, and PVC. The choice of material will depend on the location of the plumbing system, its expected uses, and the cost-effectiveness of each option.

While residential plumbing can be quite simple, such as repairing foundation leaks or unclogging a drain, industrial plumbing is much more complex. It is a field that requires specific training and knowledge that not all plumbers are able to obtain. However, industrial plumbers are essential for ensuring that factories and other large commercial establishments function smoothly.